Description
Hlk-B0505S-1WR35V to 5V 1W 200mA DC to DC power module
Product Features
1. Hlk-B0505S-1WR35V to 5V 1W 200mA DC to DC power module has a Cconstant voltage input, isolated non stabilized voltage single output,1W
2. transfer efficiency 88%(Typ)
3. Isolation is required between input and output(isolation voltage≤1500VDC)
4. output short-circuit protection
5. The voltage of the Hlk-B0505S-1WR35V to 5V 1W 200mA DC to DC power module is relatively stable.(Voltage variation range±10%Vin)
6. operating temperature range :-40°C~+85°C
7. The stability of output voltage is not required.
8. Small SIP package
9. Hlk-B0505S-1WR35V to 5V 1W 200mA DC to DC power module has an International standard pin,direct installation of PCB board.
10. Adopts high quality environmental protection, waterproof and heat conducting adhesive for filling and sealing, moisture-proof and vibration proof, meeting the waterproof and dustproof IP65 standard
11. High reliability and long life design,continuous working time MTBF≥3.5 million hours (3500000Hrs)
RW-DC072
Enviroment Condition
Project name | Qualification | Unit | Notes |
Working enviroment temperature for Hlk-B0505S-1WR35V to 5V 1W 200mA DC to DC power module | -40—+85 | ℃ | |
Storage temperture | -40—+80 ℃ | ℃ | |
Relative humidity | 5—95 | % | |
Heat dissipation mode | natural cooling | ||
Atmospheric pressure | 80—106 Kpa | Kpa | |
Vibrate | Vibration coefficient 10~500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes | Meet the requirements of secondary road transportation |
Input Characteristics of Hlk-B0505S-1WR35V to 5V 1W 200mA DC to DC power module
Items | Working conditions | Unit | Notes |
Related input voltage | 5 | Vdc | |
Input voltage range | 4.5-5.5 | Vdc | |
Maximum input current | ≤0.3 | A | |
Reflection ripple current | 15 | mA | DC 5V rated input
voltage series |
Impulse voltage | ≤9 | Vdc | |
Starting voltage | 4.5 | Vdc | |
Input under voltage protection | — | Vdc | |
Start delay time | — | Vdc | Reted input voltage and constant resistance load |
Input filter type | Capacitive filtering | ||
Hot plug | Non-support |
Notes: test at room temperature
Output Characteristics(5V/200mA) for Hlk-B0505S-1WR35V to 5V 1W 200mA DC to DC power module
Items | Technical parameters | Unit | Notes |
No-load rated output voltageVdcVdc | 5V±15% | Vdc | |
Short time maximum output current | ≥220 | mA | |
Rated output current | 200 | mA | |
Voltage regulation | ±1.2 | % | |
Load regulation | ±15 | % | |
Conversion efficiency | Vin=12Vdc, Output full load 88 | % | |
Output ripple and noise(m Vp-p) | ≤80 Pure resistive load, 20MHz bandwith, peak to peak value | mV | |
Output over-voltage protection | Output 110-160% of the maximum voltage | Vdc | |
Insulation voltage | Input-output, test time 1 minute, leakage current less than 1mA/1500V | ||
Insulation resistance | Input-output, insulation voltage 500VDC/1000MΩ | MΩ | |
Isolated capacitor | Input-output,100KHz/0.1V 20pF |
Typical Application Circuits
In order to ensure that the module can work efficiently and reliably, the minimum output load should not be less than 10% of the rated load.If the power you need is really small, please connect a resistor in parallel between the positive and negative poles of the output terminal (the sum of the actual power used by the resistor is greater than or equal to 10% of the rated power and the rated power of the selected resistor must be greater than 5 times of the actual power used, otherwise the temperature of the resistor will be higher)
Package Contains :
1 x Hlk-B0505S-1WR35V to 5V 1W 200mA DC to DC power module
For more Hi-Link Products , click here
Contact Info :
Newtech Enterprises, Sant Nagar, Burari, Street Opposite Sant Hospital, 110084 Delhi Delhi, India 📞 9041412414Follow us on facebook, click here
Reviews
Clear filtersThere are no reviews yet.