Description
Overview of this orange pi 5 16GB Ram RK3588S 8core 64bit processor
Specification
Specification | Details |
---|---|
SoC | Rockchip RK3588S (8nm LP process) |
CPU | – 8-core 64-bit processor |
– Big.Little Architecture: 4xCortex-A76 (2.4GHz) and 4xCortex-A55 (1.8GHz) | |
GPU | – Arm Mali-G610 MP4 “Odin” GPU |
– Compatible with OpenGL ES1.1/2.0/3.2, OpenCL 2.2 and Vulkan 1.2 | |
– 3D graphics engine and 2D graphics engine | |
NPU | Built-in AI accelerator NPU with up to 6 TOPS, supports INT4/INT8/INT16 mixed operation |
PMU | RK806-1 |
RAM | 4GB/8GB/16GB LPDDR4/4X |
Memory | – QSPI Nor FLASH 16MB |
– MicroSD (TF) Card Slot | |
– M.2 M-KEY Socket | |
USB | – USB3.0 × 1 |
– USB2.0 × 2 | |
– Type-C (USB3.1) × 1 | |
Video Output | – HDMI2.1, up to 8K @ 60Hz |
– DP1.4 (DisplayPort), DP1.4 and USB3.1 ports are multiplexed, shared with Type-C | |
– 2 * MIPI D-PHY TX 4Lane, configurable up to 4K @ 60Hz | |
Camera | – MIPI CSI 4Lane |
– 2 * MIPI D-PHY RX 4Lane | |
Audio | – CODEC: ES8388 |
– 3.5mm headphone jack audio input/output | |
– Input: Onboard MIC | |
– HDMI 2.1 eARC | |
Ethernet | 10/100/1000Mbps Ethernet |
Expansion Port | For extending UART, PWM, I2C, SPI, CAN and GPIO interfaces |
M.2 M-KEY Socket | – Support PCIe NVMe SSD |
– Support custom PCIe Wi-Fi6+BT5.0 module | |
Button | – 1× MaskROM key |
– 1× Recovery key | |
– 1× On/Off key | |
Power Source | Support Type-C power supply, 5V @ 4A |
LED | – Power indicator: red |
– Status indicator: green | |
Debugging | 3 Pin debug serial port (UART) |
Supported OS | – Orangepi OS (Droid) |
– Orangepi OS (Arch) | |
– Ubuntu | |
– Debian | |
– Android12 | |
SKU | RW-1076 |
RW-1076
Reviews
Clear filtersThere are no reviews yet.