Description
Original HM-10 BLE Bluetooth 4.0 module can be accessed via UART interface and supports AT-Commands for setup. It supports full Bluetooth 4.0 standard and can be used for your Arduino or microcontroller to Android or iOS communication projects.
If you are in need of such a 4.0 BLE Bluetooth module, MCU can be set up, also can controlled by a remote Bluetooth device for setting, can transfer data, and can remotely control 10 PIO pins,so,the best choice is HM-10 bluetooth module.
It Supports Remote control mode, remote device can control PIO pin or modify settings by AT commander when Connected. (Such as Iphone4s/5 ipad, Note2 etc.) and Support Central and Peripheral mode switch, modify by AT commander.
The Original HM-10 BLE Bluetooth 4.0 module combines the powerful and programmable Texas Instruments CC2541 Chipset with the specified components to start out directly together with your BLE development.The module offers an on-board voltage regulator and is TTL-level and 5 V tolerant. The Bluetooth-SoC are often accessed via UART interface and supports AT-Commands for setup. It supports full Bluetooth 4.0 standard and may be used for your Arduino or microcontroller to Android or iOS communication projects.This Original HM-10 BLE Bluetooth 4.0 module are often wont to replace HC-05, HC-06 and HC-07 devices. This module also can be configured and used as an iBeacon for used with Apple devices.
It is fully configurable by an upscale and well documented AT command-set and allows transparent digital communication via serial UART (default baud 9600bps). The Original HM-10 BLE Bluetooth 4.0 module is essentially a breakout board for cc2541, it broke out the LED pins, RX/TX and also adding the transformer that regular 5v to three .3 v.
HM-10 and HM-11 series Bluetooth module use TI CC2540 chip, configure 256KB space and support the AT command. Users can change the role (master, slave mode) and therefore the interface baud , equipment name, matching password and other parameters on-demand. It is very flexible to use.
The most complete, most convenient, and most stable Bluetooth data transmission, remote and data acquisition module. Master-slave in one, transparent transmission, replacing the interface . Remote control, transparent transmission, MCU is unnecessary. Remote data acquisition, transparent transmission, MCU is unnecessary.
Specifications of Original HM-10 BLE Bluetooth 4.0 module :
- BT Version : Bluetooth Specification V4.0 BLE
- Send and receive no bytes limit.
- Working frequency : 2.4GHz ISM band
- Modulation method : GFSK(Gaussian Frequency Shift Keying)
- RF Power : -23dbm, -6dbm, 0dbm, 6dbm, can modify through AT Command AT+POWE.
- Speed : Asynchronous 6K Bytes
- Synchronous : 6K Bytes
- Security : Authentication and encryption
- Service : Central & Peripheral UUID FFE0,FFE1
- Power : +3.3VDC 50mA
- Long range : Open space have 100 Meters with iphone4s
- Power : In sleep mode 400uA~1 .5mA, Active mode 8.5mA.
- Working temperature : –5 ~ +65 Centigrade
- Size : 26.9mm x 13mm x 2.2 mm.
Package Contains :
1 x Original HM-10 BLE Bluetooth 4.0 module
For more IOT and Wireless modules , click here
For Contact Info : Click here
Follow us on facebook, click here
Reviews
Clear filtersThere are no reviews yet.