Description
-
- VCC :5V power input pin
-
- GND : power ground pin
-
- CS : SPI SLAVE select pin (Active low)
-
- SO : SPI master input slave output lead
-
- SI : SPI master output slave input lead
-
- SCLK: SPI clock pin
-
- INT: MCP2515 interrupt pin
—
This is a easy to use CAN bus module controlled via SPI Interface. It contains CAN Controller MCP2515 and TJA1050 which is a high speed CAN trans-receiver. This module can be esaily interfaced to any microcontroller via SPI Interface. It can also be interfaced to Arduino and Raspberry PI.
Specifications & Features of MCP2515 CAN Bus Module:-
-
- Support CAN V2.0B technical standard, communication rate 1Mb/S.
-
- Use High-speed CAN transceiver TJA1050
-
- Dimension: 40×28mm
-
- SPI control for expand Multi CAN bus interface
-
- 8MHZ crystal oscillator
-
- 120Ω terminal resistance
-
- Module 5V DC power supply.
-
- 0 to 8 bytes long data field.
-
- Impedance matching, guaranteed drive capability, long-distance data transmission, prevent signal radiation
-
- The working current: typical 5mA, standby current 1 microamp. Except for the power indicator.
-
- Use serial port could view the communication data
-
- With the independent key, LED indicator, Power indicator
-
- With power pin
-
- Standard frames, extended frames, and remote frames.
-
- Positioning screw hole center spacing 23 mm x 38 mm
- RW-254
Pinout of MCP2515 CAN Bus Module:-
-
- VCC :5V power input pin
-
- GND : power ground pin
-
- CS : SPI SLAVE select pin (Active low)
-
- SO : SPI master input slave output lead
-
- SI : SPI master output slave input lead
-
- SCLK: SPI clock pin
-
- INT: MCP2515 interrupt pin
* Product Images are shown for illustrative purposes only and may differ from actual product.
